Home  |  Why Troyke?  |  Products  |  Catalog  |  Accessories  |  Service  |  Articles  |  Contact Us

Series    |    Direct Drive    DL    NC    CTL    TDL    L    TT    Collet Indexer    Manual    HDL Series    HMB Series
 

DL Series
Select a model to see specifications:


See diagram to the right for
matching dimensions below:

A: 5.118 (130.0)
B:7.50 (191)
C:5.25 (133)
D:19.38 (492)
E:5.50 (140)
F:N/A
G:11.81 (300)

SPECIFICATIONS:

· Turntable Diameter (MM)6.50 (165)
· Standard Thru Hole Dia (MM)1.181 (30.0)
· Oversize Thru Hole Dia (MM)N/A
· Maximum Thru Hole Dia (MM)N/A
· Horizontal Load Capacity (KG)N/A
· Vertical Load Capacity (KG)75 (34)
· Faceplate T-Slot Width (MM).47 (12) x 4
· Standard Total Gear Ratio90:1
· Alternate Total Gear Ratio120:1
· Max. Speed Range (STD Ratio)0-22 RPM
· STD. CONT. Torque LBS-FT (NM) 94 (127)
· Brake MethodPneumatic
· Brake Torque LBS-FT (NM)125 (169)
· Programmable Resolution.001 DEG.
· STD. Total Angular Accuracy60 sec.
· STD. Repeatability10 sec.
· Opt.(H or I) Anglr. Accuracy+/- 5
· Opt.(H or I) Repeatability+/- 2
· Unit Weight lbs. (KG)109 (49)
· Ship Weight lbs. (KG)159 (72)
* Depends on type of servo motor.
* 1 Vertical mount only
* 2 Table is less the pneumatic brake

DL Series Specs
11294 Orchard St., Cincinnati, Ohio 45241 | 513.769.4242 | afroehlich@troyke.com
Why Troyke? | Products | Catalog | Accessories | Service | Articles | Site Map | Contact Us
© 2012 Troyke Manufacturing Company | Troyke... Changing the Degree of Accuracy